how to uncrease air force 1s

Want to learn how to uncrease Air Force 1s? This guide will show you how to remove those stubborn creases from your favorite kicks and keep them looking fresh.

Air Force 1s are classic sneaker that has been around for decades. These sneakers are beloved for their stylish design and comfortable fit, but one common problem that many Air Force 1 owners face is creases. 

Creases on sneakers can make them look worn out and unattractive, but luckily there are several methods you can use to uncrease Air Force 1s and restore them to their former glory.

Method 1:

Use a Towel and Iron

One of the most popular methods to uncrease Air Force 1s is to use a towel and iron.

Here’s how to do it:

Wet a small towel or washcloth with water and wring it out so it’s damp but not dripping wet.

Stuff the damp towel inside the toe box of the sneaker, making sure it’s snug and covers the creased area.

Turn on your iron to the lowest heat setting.

Place a dry towel over the creased area of the sneaker.

Press the iron onto the dry towel, moving it back and forth over the crease for a few seconds at a time.

Remove the dry towel and damp towel from the sneaker.

Check the creased area to see if it’s improved. If it’s still creased, repeat the process until it’s gone.

Important Note: 

Be very careful when using an iron on sneakers, as the heat can damage the material. 

Make sure to use the lowest heat setting possible and keep the iron moving at all times.

Method 2:

 Use a Hair Dryer and Towel

Another method to uncrease Air Force 1s is to use a hair dryer and towel. 

Here’s how to do it:

Stuff the toe box of the sneaker with a towel, making sure it’s snug and covers the creased area.

Use a hairdryer on high heat to blow hot air over the creased area for a few seconds at a time.

Use your fingers to massage the creased area while the hot air is blowing.

Remove the towel from the toe box and let the sneaker cool down for a few minutes.

Check the creased area to see if it’s improved. If it’s still creased, repeat the process until it’s gone.

Important Note: Be careful not to overheat the sneaker or hold the hair dryer too close to the material, as this can cause damage.

Method 3: 

Use Shoe Trees

Shoe trees are another useful tool to uncrease Air Force 1s. 

Here’s how to use them:

Insert a shoe tree into the sneaker, making sure it’s snug and covers the creased area.

Leave the shoe tree in for at least 24 hours, or longer if necessary.

Remove the shoe tree and check the creased area to see if it’s improved.

 If it’s still creased, repeat the process with a new shoe tree.

Important Note: 

When choosing a shoe tree, look for one made from a material that won’t damage the sneaker, such as wood or plastic. 

Avoid using shoe trees made from metal, as they can scratch or dent the material.

Method 4:

Stuff with Paper

If you don’t have a shoe tree, you can also use paper to uncrease Air Force 1s.

Here’s how to do it:

Crumple up a few sheets of newspaper or tissue paper into small balls.

Stuff the balls of paper into the toe box of the sneaker, making sure they cover the creased area.

Leave the paper in for at least 24 hours, or longer if necessary.

Remove the paper and check the creased area to see if it’s improved. 

If it’s still creased, repeat the process with new paper.

Important Note: 

Be careful not to overstuff the toe box with paper, as this can cause the sneaker to lose its shape. 

Use just enough paper to cover the creased area.

Tips to Avoid Creases in the First Place

Prevention is always better than cure, so here are some tips to help you avoid creases on your Air Force 1s:

Proper Storage:

 Store your sneakers in a cool, dry place away from direct sunlight and moisture. 

Avoid stacking sneakers on top of each other, as this can cause creases.

Clean Them Regularly:

 Regularly clean your sneakers to remove dirt and debris that can cause creases. 

Use a soft brush and mild soap to clean the exterior, and a soft cloth to clean the interior.

Wear Them Properly: 

To avoid creases, make sure to wear your sneakers with the correct size and avoid walking on uneven surfaces.

Conclusion: 

In conclusion, creases on Air Force 1s can be unsightly, but there are several methods you can use to uncrease them. 

Whether you use a towel and iron, hair dryer and towel, shoe trees, or paper, be sure to follow the instructions carefully to avoid damaging your sneakers. 

Additionally, practising proper storage, cleaning, and wearing habits can help prevent creases in the first place.

With these tips and methods, you can keep your Air Force 1s looking fresh and stylish for years to come.

FAQ:

Q: Is it safe to use an iron or hairdryer on sneakers?

A: Using an iron or hairdryer on sneakers can be risky as the heat can damage the material. It’s important to use the lowest heat setting possible and keep the iron or hairdryer moving at all times to avoid overheating the sneaker.

Q: How long should I leave the shoe trees or paper in the sneaker to uncrease it?

A: It’s recommended to leave the shoe trees or paper in the sneaker for at least 24 hours, or longer if necessary. Check the creased area periodically to see if it’s improving and repeat the process if needed.

Q: How can I prevent creases from forming on my Air Force 1s?

A: To prevent creases from forming on your Air Force 1s, store them in a cool, dry place away from direct sunlight and moisture. Clean them regularly and wear them properly, avoiding walking on uneven surfaces. Additionally, consider using products like sneaker shields or crease protectors to help prevent creases from forming.