If you’re a dabber, then you know that reclaim can be an excellent source of concentrates. Reclaim is the oil that accumulates in your dab rig, and while it may not look pretty, it can be a potent concentrate. However, reclaim usually contains a lot of water, which can dilute the potency of your concentrates. So, how do you get water out of reclaim? In this article, we’ll explore some tips and tricks to help you get the most out of your reclaim.
What is Reclaim and Why Does it Contain Water?
- Reclaim is the residual oil that collects in your dab rig.
- When you heat up your dab rig, the oil vaporizes, and some of it condenses on the cooler parts of the rig, such as the walls and the water chamber.
- Over time, this oil builds up and forms a sticky, resinous substance known as reclaim.
- Reclaim can be collected and used as a concentrate, but it usually contains a lot of water.
- The reason reclaim contains water is that the oil vapor condenses on the cooler parts of the rig, which are usually wet from the water used to cool the vapor.
This water mixes with the oil and forms a solution. While this solution can be used as a concentrate, the water can dilute the potency of the oil, making it less effective.
Tips and Tricks for Getting Water Out of Reclaim
1. Use Heat
One of the easiest ways to get water out of reclaim is to use heat. Place your reclaim on a silicone mat or parchment paper and spread it out as thinly as possible. Use a hairdryer or heat gun to apply heat to the reclaim. The heat will cause the water to evaporate, leaving behind the oil.
2. Use a Vacuum Oven
If you have access to a vacuum oven, this can be an effective way to remove water from reclaim. Place your reclaim in a silicone jar or dish and put it in the vacuum oven. Apply heat and vacuum to the dish. The heat will cause the water to evaporate, and the vacuum will help to pull the water vapor out of the dish.
3. Use a Double Boiler
Another way to get water out of reclaim is to use a double boiler. Place your reclaim in a heat-resistant glass jar or dish and place it in a pan of boiling water. The heat from the boiling water will cause the water in the reclaim to evaporate, leaving behind the oil.
4. Use a Solvent
You can also use a solvent to remove water from the reclaim. The most commonly used solvent is ethanol. Place your reclaim in a glass jar or dish and add enough ethanol to cover the reclaim. Stir the mixture thoroughly and let it sit for a few minutes. The ethanol will dissolve the water and separate it from the oil. You can then use a pipette to remove the ethanol and water layer, leaving behind the oil.
5. Use a Desiccant
A desiccant is a substance that absorbs moisture from the air. You can use a desiccant to remove water from reclaim by placing your reclaim in a glass jar or dish and adding a desiccant pack. Seal the jar or dish and let it sit for a few days. The desiccant will absorb the water, leaving behind the oil.
Getting water out of reclaim is a simple process that can greatly improve the potency of your concentrates. By using one of the tips and tricks we’ve outlined above, you can easily remove water from your reclaim and enjoy a more potent concentrate. So, the next time you collect reclaim, don’t let the water content dilute your oil. Instead, use one of the methods we’ve discussed to get the water out and enjoy the full potency of your concentrates.
- Can I use a hair dryer to remove water from the reclaim?
Yes, you can use a hairdryer to remove water from the reclaim. Spread out the reclaim on a silicone mat or parchment paper and use the hairdryer to apply heat. The heat will cause the water to evaporate, leaving behind the oil.
- How long does it take to remove water from reclaim using a desiccant?
It depends on the amount of water in your reclaim and the size of the desiccant pack. Generally, it can take anywhere from a few hours to a few days to remove all the water from reclaim using a desiccant.
- Can I reuse the ethanol I use to remove water from reclaim?
Yes, you can reuse the ethanol you use to remove water from reclaim. After separating the water and oil layers, you can pour the ethanol into a clean glass jar or dish and let it evaporate. Once the ethanol has evaporated, you can reuse it for your next reclaim extraction.