how to clean a Maytag front load washer

Don’t let a dirty washer ruin your laundry routine. Follow our step-by-step guide to clean your Maytag front load washer and keep it in top condition.

With just a few simple steps, you can eliminate bad odors and prevent future buildup. Start enjoying cleaner, fresher-smelling clothes today by taking action and cleaning your washer.

Front-load washers are an excellent choice for households looking to save water and energy while still getting their clothes clean.

 However, over time, these machines can accumulate dirt, grime, and mould, leading to unpleasant odours and even affecting the performance of the washer. 

That’s why it’s essential to learn how to clean a Maytag front load washer properly. 

In this article, we’ll provide you with a step-by-step guide to help you keep your washer looking and smelling fresh.

Gather Supplies

Before you start cleaning, gather all the supplies you need to get the job done. Here’s a list of items you’ll need:

• White vinegar
• Baking soda
• Microfiber cloth or sponge
• Scrub brush
• Toothbrush
• Dish soap
• Bucket
• Clean water

Clean the Exterior

The first step in cleaning a Maytag front load washer is to clean the exterior of the machine. Here’s how to do it:

• Turn off the washer and unplug it from the wall.
• Use a microfiber cloth or sponge to wipe down the exterior of the machine, paying special attention to the control panel, the door, and the handle.
• If there are any stubborn stains or grime, use a mixture of warm water and dish soap to clean them off. 
• Use a scrub brush or toothbrush to scrub away any buildup.
• Rinse the exterior with clean water and wipe it dry with a microfiber cloth.

Clean the Drum and Gasket

The next step is to clean the drum and gasket of the washer. This is an essential step to prevent mould and mildew growth. Follow these steps:

• Open the washer door and inspect the gasket for any visible signs of mould or mildew. 
• If you see any, mix a solution of equal parts water and white vinegar in a spray bottle and spray it directly onto the affected areas.
• Use a toothbrush or scrub brush to scrub away any mould or mildew. Be sure to get into all the nooks and crannies
• Once you’ve scrubbed away the mould, wipe the gasket down with a microfiber cloth or sponge.
• Next, add 1/2 cup of baking soda directly to the drum of the washer.
• Run a hot water cycle on the washer, using the highest level of water possible.
• Once the cycle is complete, wipe down the drum with a microfiber cloth or sponge.

Clean the Dispenser and Filters

The dispenser and filters of a front load washer can easily get clogged with detergent residue and other buildup. Here’s how to clean them:

• Remove the detergent dispenser from the washer and rinse it under hot water.
• Use a toothbrush or scrub brush to remove any stubborn buildup.
• Check the filters of the washer and remove any debris. 
• You may need to refer to the washer’s manual for specific instructions on how to remove and clean the filters.
• Run a hot water cycle on the washer with 1/2 cup of white vinegar added to the detergent dispenser. 
• This will help clean out any remaining residue in the dispenser and filters.

Run a Cleaning Cycle

Running a cleaning cycle on your Maytag front load washer is an effective way to get rid of any remaining dirt or grime. Follow these steps:

• Add 1/2 cup of baking soda and 2 cups of white vinegar directly to the drum of the washer.
• Run a hot water cycle on the washer, using the highest level of water possible.
• Once the cycle is complete, wipe down the drum and gasket with a microfiber cloth or sponge.

Maintenance Tips

To keep your Maytag front load washer clean and running smoothly, here are some maintenance tips:

• Wipe down the gasket and drum after each use to prevent mould and mildew growth.
• Use only high-efficiency (HE) detergent and follow the recommended dosage.
• Leave the washer door open between uses to allow air to circulate and prevent odours.
• Clean the dispenser and filters regularly, following the manufacturer’s instructions.
• Consider using a washing machine cleaner once a month to keep your washer fresh and clean.

Conclusion

In conclusion, cleaning a Maytag front load washer is an essential task that should be done regularly to keep the machine running smoothly and smelling fresh. 

By following the step-by-step guide outlined in this article, you can effectively clean your washer and prevent mould and mildew growth. 

Remember to gather all the supplies you need, clean the exterior, drum and gasket, dispenser and filters, and run a cleaning cycle. 

By maintaining your washer properly, you can extend its lifespan and get the most out of your investment.

FAQs 

How often should I clean my Maytag front load washer?

We recommend cleaning your washer once a month to prevent the buildup of dirt, grime, and mould. However, if you notice any unpleasant odours or visible signs of mold or mildew, you should clean the washer immediately.

Can I use bleach to clean my Maytag front load washer?

We do not recommend using bleach to clean a front load washer. Bleach can damage the gasket and other components of the machine. Instead, use white vinegar and baking soda to clean the washer.

How can I prevent mould and mildew growth in my Maytag front load washer?

To prevent mould and mildew growth, be sure to wipe down the gasket and drum after each use and leave the washer door open between uses. Also, use only high-efficiency (HE) detergent and follow the recommended dosage. Finally, consider running a cleaning cycle once a month to keep your washer fresh and clean.